When Was The Miter Saw Invented?

When Was The Miter Saw Invented

For contracting and do-it-yourself projects, a healthy selection of saws is a must. And while there may be a debate about which saws are needed more than others, the miter saw is generally prized for its sheer effectiveness in cutting various types of materials.

Miter saws do not require much learning and are generally easy to use even for beginners. Depending on the type of projects you want to do most often, a miter saw can be a valuable ally, significantly reducing the time you spend cutting materials. Visit website

What is a miter saw?

By definition, crosscuts and miter cuts are made in a workpiece using a miter saw. To do this, pull a mounted circular saw blade on the piece, which lies on a flat surface underneath.

This type of sawing is stationary, as you bring the saw blade to one piece to cut it instead of letting the saw blade run along with the piece. Imagine slicing a carrot by feeding it to a kitchen knife as you make more cuts until all you have left is round pieces.

When using a miter saw, the workpiece is normally held against the fence of the saw, creating a precise cutting angle between the plane of the saw blade and the plane of the longest edge of the workpiece. When cutting in the standard position, the cutting angle is 90 °.

When Was The Miter Saw Invented

For most users, these saws are useful for cutting larger pieces into smaller ones and refining them with other saw types.

A short history of the miter saw:

Understanding the exact history of the miter saw is a bit tricky, especially because the saw is a combination of things, and in practice, a circular saw mounted on a retractable arm. In this sense, first, consider the history of the circular saw.

What is a chop saw?

Sometimes it is common for people to use the terms “chop saw” and “miter saw” synonymously. This is understandable since both do the same thing and look alike.

Basically a chop saw is a slimmed-down version of a miter saw. As the name implies, the saw can only “hack” as if it were going down, and that’s it. Miter saws can rotate to cut at angles, and sometimes also make bevel cuts. If you hear someone sawing a chop, suppose that it is just a base saw with a circular saw blade that can be lowered to create a straight-angled cross-section.

What is the miter saw used for?

Miter saws have limited use but can perform at least two and sometimes three types of cuts. A cross-section refers to a straight cut that you make over a workpiece that is parallel to the edges. This is as simple as cutting off the end of a 2×4 board to make it a 2×3 board.

Crosscuts are certainly the simplest of cuts, which is possible with any other saw. The advantage of a miter saw is that you simply drop the saw blade onto the workpiece in one movement. This is much easier and more accurate than any other method where you need to guide a saw blade through a piece.

Conclusion:

As for the modern version of the power miter saw? This was invented in 1964 by Ed Niehaus, a tool designer from Rockwell. His original miter saw showed many innovations that can still be seen today on miter saws, such as radial arc spring force, leaf brakes and dust extraction.

Tagged